Segway-Ninebot Zing A-Series A6 eKickScooter
Segway-Ninebot Zing A-Series A6 eKickScooter
Out of Stock
£139.00

Segway-Ninebot Zing A-Series A6 eKickScooter

Part number: AA.00.0012.14

The Ninebot eKickScooter ZING A6 powered by Segway is part of the eKickScooter series designed exclusively for youngsters. Despite being designed as a toy for youngsters, no compromises have been made in terms of the quality of this eKickScooter.

Extra attention has been given to the safety features such as built-in sensors and anti-slippery material placed on the footboard. It can speed up to a maximum of 12 km/h (7.5 mph) and with a battery life of up to 40 mins which can give out a maximum range of 5 km. The Ninebot eKickScooter ZING A6 is extremely lightweight (4.6 kg) and can be easily disassembled for hassle-free and easy storage.

To give a cool finishing touch to the eKickScooter, ambient lights are located on the side of the footboard (always on) and the front wheel when riding. The motor has been placed in the rear wheel which brings more stability and makes the eKickScooter very easy to handle and next to that anti-slip material has been used for the footboard and tyres to give a steadfast riding experience.

Comfy and good friction TPR (Thermo Plastic Rubber) handlebar grips, which are also easy to clean, are used for more stability. The multi-functional rear fender serves as a footbrake as well as a switch to change between riding modes. The three different riding modes are meant to assist in learning as well as to increase safety by limiting the maximum speed to 12 km/h (7.5 mph) in the 3rd gear.

The eKickScooter ZING A6 can be fully charged in just about 3 hours and the Smart Battery Management System (BMS) makes sure that no power goes to waste whilst closely monitoring the battery performance to prevent criticalities like overcharge and discharge, overheating, short-circuit and such.

  • Maximum speed of approx. 12 km/h (7.5 mph)
  • Range of up to 5km (3.1m), approx. 40 min
  • 3 riding modes to adapt to each child level: 1st gear (8 km/h), 2nd gear (10 km/h) and 3rd gear (12 km/h)
  • Tap on the rear fender to switch riding modes (by stepping twice)
  • Total charging time of up to 3 hours
  • Battery capacity: 27 Wh (2500 mAh)
  • Eco-friendly Smart Battery Management System (BMS) closely monitors battery performance
  • Low centre of gravity and good grip TPR (Thermo Plastic Rubber) for stability
  • Front: 5-inch PU perfusion, Rear: 4-inch solid rubber tyres for durability and are maintenance-free
  • Anti-slip footboard and tyres for more safety
  • Rear fender foot brake: most intuitive braking method for children
  • Built-in sensor in the footboard to detect if the rider is on or off for enhanced safety
  • Ambient lights located on the side of the footboard (always on) and on the front wheel (when rolling)
  • Extremely Lightweight: 4.6 kg (10.1 lbs.)
  • 3M reflector sticker for better visibility
  • Easy to assemble/disassemble for hassle-free and easy storage
  • Recommended age 6 to 10 years old, height between 105-140 cm.

WARNING: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land.

Segway-Ninebot AA.00.0012.14
Your item has been added to your basket
Limited Time Deals 
iiyama G2745HSU-B1 G-Master 27" Black Hawk Gaming Monitor - Full HD - IPS - 100Hz- 1ms - FreeSync - Speakers £79.99 £99.99 Save £20.00
Acer KA240YHbi 24" Monitor - 100Hz - 1ms - HDMI- AMD FreeSync- Full HD £69.99 £79.99 Save £10.00
Acer Aspire 3 A314-36P 14" Laptop - Intel Core i3 - 8 GB RAM- 512 GB SSD - Windows 11 Home - Silver £348.99 £499.99 Save £151.00
Swan Nordic Manual Espresso machine 1.2 L £99.99
free delivery
Anda Seat Phantom 3 PC gaming chair Upholstered padded seat Black
Anda Seat Phantom 3 PC gaming chair Upholstered padded seat Black £279.99
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £27.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £27.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock