Canon imageFORMULA P-208II Sheet-fed scanner 600 x 600 DPI A4 Black Canon
Canon imageFORMULA P-208II Sheet-fed scanner 600 x 600 DPI A4 Black
In Stock
£109.99

Canon imageFORMULA P-208II Sheet-fed scanner 600 x 600 DPI A4 Black

Part number: 9704B003
600x600DPI, LED, 216x356mm, USB 2.0, 600g, black

Canon imageFORMULA P-208II. Maximum scan size: 216 x 356 mm, Optical scanning resolution: 600 x 600 DPI, Input colour depth: 24 bit. Scanner type: Sheet-fed scanner, Product colour: Black. Sensor type: CIS, Light source: LED, Scan drivers: ISIS, TWAIN. Standard input capacity: 1 sheets. Maximum ISO A-series paper size: A4, Scanning media types supported: Business Card, Card stock, Plain paper, Post Card(JPN), ISO A-series sizes (A0...A9): A4

Outstandingly portable and ADF-equipped
The P-208ll now comes equipped with ADF that can hold up to 10 documents. With its compact design, this lightweight scanner — weighing just 600g and measuring 312.5 x 55.5 x 40mm — is small enough to fit neatly into a bag for quick and easy use wherever you go.

Plug & Scan
There is no need to install any driver software or scanning application on your PC as the pre-installed scanning utility, CaptureOnTouch Lite, provides plug-and-scan capabilities. Simply opening the feed tray turns the scanner on and makes it ready to scan.

USB Powering
For enhanced portability, it now comes loaded with a USB bus power drive that makes scanning possible without an AC/DC adaptor. You can scan wherever and whenever the need arises using a single USB cable that packs away neatly when the job is done.

Full auto mode
This mode allows you to scan documents that contain pages of varying type under conditions that best suit each type. The mode also includes the Skip Blank Page function for efficient scanning of only the necessary pages.

Picture mode
Use the picture scanning mode to reproduce gradation in colour more accurately in scanned image.

Canon 9704B003
Canon imageFORMULA P-208II Sheet-fed scanner 600 x 600 DPI A4 Black
Scanning
Black/white scanning colour modes Grayscale
Duplex ADF scan speed (colour, A4) 12 ipm
Duplex ADF scan speed (b/w, A4) 16 ipm
ADF scan speed (colour, A4) 6 ppm
ADF scan speed (b/w, A4) 8 ppm
Greyscale levels 256
Film scanning N
Input colour depth 24 bit
Duplex scanning Y
Colour scanning Y
Optical scanning resolution 600 x 600 DPI
Maximum scan size 216 x 356 mm
Design
Product colour Black
Built-in display N
Scanner type Sheet-fed scanner
Performance
Scan drivers ISIS, TWAIN
Light source LED
Sensor type CIS
Input capacity
Standard input capacity 1 sheets
Paper handling
Maximum scan area (ADF) 216 x 356 mm
Minimum scan area (ADF) 50.8 x 70 mm
Auto Document Feeder (ADF) media weight 52 - 380 g/m²
Letter Y
ISO A-series sizes (A0...A9) A4
Scanning media types supported Business Card, Card stock, Plain paper, Post Card(JPN)
Maximum ISO A-series paper size A4
Ports & interfaces
Standard interfaces USB 2.0
USB version 2.0
USB port Y
Power
Current 0.5 A
Power consumption (off) 0.1 W
Power consumption (standby) 1.5 W
Power supply type USB
Power consumption (typical) 2.5 W
General
Product family imageFORMULA
System requirements
Windows operating systems supported Y
Mac operating systems supported Y
Operational conditions
Operating relative humidity (H-H) 25 - 80%
Operating temperature (T-T) 10 - 32.5 °C
Weight & dimensions
Weight 600 g
Height 40 mm
Depth 89.5 mm
Width 312.5 mm
Technical details
Harmonized System (HS) code 84716070
Sustainability certificates RoHS, ENERGY STAR
Your item has been added to your bag
Customers also bought
Russell Hobbs RHRETHFH1001B electric space heater Indoor Black 1800 W Fan electric space heater £24.99
Russell Hobbs RHOFR3001W 5 Fin Oil Filled Radiator in White £29.99
Carmen C81194 White King Fitted Underblanket £20.99
FR-TEC Inari Gaming Headset-Playstation/XBOX/PC/MAC/SWITCH- Black & Red £6.49 £12.99 Save £6.50
Black & Decker BXEH60001GB 900ml Portable Mini Dehumidifier White £37.99
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £24.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £24.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock