Aerocool DUO12PRO Kit 3xFan 12cm ARGB LED Dual Ring Antivibration 6 Pins Black Aerocool
Aerocool DUO12PRO Kit 3xFan 12cm ARGB LED Dual Ring Antivibration 6 Pins Black
Out of Stock
£23.99

Aerocool DUO12PRO Kit 3xFan 12cm ARGB LED Dual Ring Antivibration 6 Pins Black

Part number: ACF3-DU10227.11
3x Fan Ø 120 mm, 1000 rpm, 6-Pin, 19.7 dBA, RF wireless hub

Aerocool DUO12PRO Kit 3xFan 12cm ARGB LED Dual Ring Antivibration 6 Pins Black. Type: Fan, Fan diameter: 12 cm, Rotational speed (max): 1000 RPM, Noise level (high speed): 19.7 dB, Maximum airflow: 33.4 cfm, Maximum air pressure: 1.29 mmH2O, Bearing type: Hydraulic. Width: 120 mm, Depth: 120 mm, Height: 25 mm. Product colour: Black

120mm fan with 6-Pin connector featuring a stylish Double RGB LED Ring Lighting design. Access 16.8 million colors using compatible Addressable RGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion. Comes equipped with three Duo 12 Addressable RGB fans, one H66F RGB Control Hub, and a remote control.

ADDRESSABLE RGB COMPATIBLE
Take full control of your Duo 12 Addressable RGB fans using any one of three ways:

- ADDRESSABLE RGB MOTHERBOARD
- LED CONTROL BUTTON
- RGB REMOTE CONTROL

H66F RGB CONTROL HUB
Features a 6-port hub with PWM control functions that allows you to connect up to six 6-Pin Addressable RGB fans and up to two Addressable RGB accessories with 5V ARGB connector.

Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).

PWM CONTROL FUNCTIONS
H66F hub comes with PWM control functions for optimized fan speed to maximize cooling efficiency and minimize noise.

Please check if the 4-Pin fan header on your motherboard is PWM compatible.

- PWM based – PWM compatible
- Voltage based – not PWM compatible

ADDRESSABLE RGB RECEPTOR CABLE INCLUDED

Comes with a receptor cable to connect your hub with compatible Addressable RGB motherboards.

- ARGB MB Connector (For all other ARGB MBs such as ASUS, MSI, etc.)
- ARGB MB Connector (Gigabyte RGB Fusion)
- 4-Pin Hub Connector
- PWM 4-Pin Connector

POWER CABLE INCLUDED
Comes with a cable to power the hub.

- SATA Power Connector
- 4-Pin Hub Power Connector

DOUBLE RING RGB LED LIGHTING
Double RGB LED rings around the fan and circling the center of the fan to deliver a stylish and vibrant lighting experience while offering a truly unique way to keep your system cool, in more ways than one.

CURVED FAN BLADES
Curved fan blades effectively direct airflow to increase air pressure and reduce air resistance for maximum cooling performance.

ANTI-VIBRATION PADS
Anti-vibration pads absorb and dampen vibrations caused by fan rotation.

Aerocool ACF3-DU10227.11
Aerocool DUO12PRO Kit 3xFan 12cm ARGB LED Dual Ring Antivibration 6 Pins Black
Performance
Mean time between failures (MTBF) 60000 h
Quantity per pack 3 pc(s)
Bearing type Hydraulic
Pulse-width modulation (PWM) support N
Maximum air pressure 1.29 mmH2O
Maximum airflow 33.4 cfm
Noise level (high speed) 19.7 dB
Rotational speed (max) 1000 RPM
Fan diameter 12 cm
Type Fan
Suitable location Computer case
Design
Fan connector 6-pin
Illumination colour Multi
Illumination LED Y
Number of fans 3 fan(s)
Product colour Black
Power
Rated current 0.15 A
Starting voltage 6 V
Rated voltage 12 V
Power consumption (typical) 1.8 W
Weight & dimensions
Height 25 mm
Depth 120 mm
Width 120 mm
Packaging content
Number of screws 12
Screws included Y
Other features
Harmonized System (HS) code 84733080
Your item has been added to your bag
Customers also bought
Russell Hobbs RHRETHFH1001B electric space heater Indoor Black 1800 W Fan electric space heater £24.99
Russell Hobbs RHOFR3001W 5 Fin Oil Filled Radiator in White £29.99
Carmen C81194 White King Fitted Underblanket £20.99
FR-TEC Inari Gaming Headset-Playstation/XBOX/PC/MAC/SWITCH- Black & Red £6.49 £12.99 Save £6.50
Black & Decker BXEH60001GB 900ml Portable Mini Dehumidifier White £37.99
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £24.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £24.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock