Einhell GE-CH 1846 Li Kit Double blade 2.3 kg
Einhell GE-CH 1846 Li Kit Double blade 2.3 kg
Out of Stock
£91.99

Einhell GE-CH 1846 Li Kit Double blade 2.3 kg

Part number: 3410683
GE-CH 1846 Li Kit (1x2,0Ah)

The GE-CH 1846 Li Kit cordless hedge trimmer is an efficient tool which thanks to its low weight and handy size provides good service for the trimming of hedges, shrubs and bushes on large grounds and allotments where there is no connection to the electric power grid. With the new Power X-Change battery system from Einhell, the hedge trimmer has a 18 V battery pack with 2.0 Ah for long work sessions. The GE-CH 1846 Li Kit has a battery charge level indicator with three LEDs where you can check the current charge level at a glance. In addition, the battery packs can be used for all products from the Power X-Change family. Complete with an additional high-speed charger. The integrated two-hand safety switch brings the cutters to a standstill in less than 1 second when a switch is released. The cutters are protected by an aluminium cover. The shock guard has a hole for wall mounting and enables this cordless hedge trimmer to be stored away in an instant in minimum space. For a long service life the gearing is made of metal, for clean cutting results the blades are made of laser-cut and diamond-ground steel. The GE-CH 1846 Li Kit comes with a sturdy cutter guard for safe and user-friendly transportation or storage.

Einhell 3410683
Einhell GE-CH 1846 Li Kit Double blade 2.3 kg
Technical details
Cutting length 46 cm
Product colour Black, Red
No-load stroke rate 2200 spm
Blade tooth spacing 1.5 cm
Blade size 52 cm
Blade type Double blade
Weight & dimensions
Package weight 3.4 kg
Package height 180 mm
Package depth 907 mm
Package width 175 mm
Weight 2.3 kg
Power
Battery voltage 18 V
Power source Battery
Your item has been added to your bag
Customers also bought
Russell Hobbs RHRETHFH1001B electric space heater Indoor Black 1800 W Fan electric space heater £24.99
Russell Hobbs RHOFR3001W 5 Fin Oil Filled Radiator in White £29.99
FR-TEC Inari Gaming Headset-Playstation/XBOX/PC/MAC/SWITCH- Black & Red £6.49 £12.99 Save £6.50
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £24.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £24.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock