Philips E Line 241E1SC/00. Display diagonal: 59.9 cm (23.6"), Display resolution: 1920 x 1080 pixels, HD type: Full HD, Display technology: LED, Response time: 4 ms, Native aspect ratio: 16:9, Viewing angle, horizontal: 178°, Viewing angle, vertical: 178°. VESA mounting. Product colour: Black
The 24" curved E line display offers a truly immersive experience in a stylish design. Experience crisp Full HD visuals and smooth action with AMD FreeSync™ technology.
Philips
241E1SC/00
Philips 241E1SC/00 23.6" Full HD Curved Monitor, 75Hz, AMD FreeSync, SmartImage
Display
NTSC coverage (typical)
83.87%
sRGB coverage (typical)
100.78%
Colour gamut
87%
RGB colour space
sRGB
Surface hardness
3H
Haze rate
25%
DDC/CI
Yes
Display sRGB
Yes
Display diagonal (metric)
59.9 cm
Digital vertical frequency
48 - 76 Hz
Digital horizontal frequency
30 - 85 kHz
Viewable size, vertical
29.3 cm
Viewable size, horizontal
52.1 cm
Vertical scan range
48 - 76 Hz
Horizontal scan range
30 - 85 kHz
Pixel pitch
0.272 x 0.272 mm
Pixel density
93 ppi
Display number of colours
16.7 million colours
Viewing angle, vertical
178°
Viewing angle, horizontal
178°
Maximum refresh rate
75 Hz
Contrast ratio (typical)
3000:1
Aspect ratio
16:9
Supported graphics resolutions
1920 x 1080 (HD 1080)
Screen curvature rating
1500R
Screen shape
Curved
Anti-glare screen
Yes
Display technology
LED
Backlight type
W-LED
HD type
Full HD
Response time
4 ms
Display brightness (typical)
250 cd/m²
Panel type
VA
Native aspect ratio
16:9
Display resolution
1920 x 1080 pixels
Display diagonal
59.9 cm (23.6")
>
Performance
Low Blue Light technology
Yes
Flicker-free technology
Yes
Component video sync
Separate sync, Sync-on-green (SOG)
AMD FreeSync
Yes
>
Multimedia
Built-in camera
No
Built-in speaker(s)
No
>
Design
Certification
CB, CE Mark, CU-EAC, EAEU RoHS, TUV/ISO9241-307, TUV-BAUART
Connection to existing cooker socket outlet within 2 metres of appliance.
Test electrical circuit.
Assess connection point to comply with standard building regulations.
Test the appliance.
We are unable to connect if :
The connection point is not a standard outlet.
The electrical outlet is damaged or not complete.
On/off control is above the cooker in the "hot zone".
The electric circuit fails our tests.
A General assessment by installer suggests it is unsafe to connect.
To help the connection go smoothly, please watch ourconnection video.
Old Appliance Removal - £27.00
Remove & Recycle:
Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.
Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK
Defrosting is required ahead of recycling refrigeration products.
Gas Cookers are required to be disconnected ahead of removal.
Wet Connection - Washers - £27.00
WATER CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to water plumbing supply within 1m of appliance.
Connect to water supply connector if a safe and standard connection is present.
Connect to waste pipe within 1m from appliance.
Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Extended waste piping is being used.
Poor unsuitable plumbing is identified by installer.
Taps are seized and pose risk of leakage.
General assessment by installer suggests unsafe.
To help the connection of your appliance go smoothly, please watch ourdishwasherorwashing machineconnection video.
Wet Connection - Washer Dryers - £27.00
WATER CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to water plumbing supply within 1m of appliance.
Connect to water supply connector if a safe and standard connection is present.
Connect to waste pipe within 1m from appliance.
Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Extended waste piping is being used.
Poor unsuitable plumbing is identified by installer.
Taps are seized and pose risk of leakage.
General assessment by installer suggests unsafe.
To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.
Dry Connection - £15.00
DRY CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to suitable existing Dryer outlet vents.
Test appliance to ensure connected and ready for use.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Fridge specific - Door hangings are required to be reversed.
Dryer specific - Extended vent piping is being used.
Dryer specific - No outlet connection for dryer vent pipe.
General assessment by installer suggests unsafe.
To help the connection go smoothly, please watch ourconnection video.
