NZXT Aer P Computer case Fan 14 cm Black, Grey
NZXT Aer P Computer case Fan 14 cm Black, Grey
Out of Stock
£13.99

NZXT Aer P Computer case Fan 14 cm Black, Grey

Part number: RF-AP140-FP
140 mm, Plastic/Rubber, FDB, Black

The Aer P high static pressure fan is designed for liquid-cooling perfection. Engineered to maximize the cooling potential of radiators, it features a chamfered intake and exhaust for high-performance airflow and winglet-designed blades to improve drag efficiency. The Aer P uses fluid dynamic bearing to provide silent operations, long-term durability, and achieves powerful cooling performance.

DESIGNED FOR RADIATORS

Aer P provides high performance cooling for radiators. Enhance your PC’s cooling with a push/pull configuration or recreate the Kraken’s award-winning fan performance with an all-in-one cooler.

PERFORMANCE ENGINEERED

These PWM static pressure fans are designed with a chamfered-intake and exhaust that boost overall airflow and pressure.

WINGLET TIPS

The winglet designed fan blades minimize drag and further enhance fan performance.

FLUID DYNAMIC BEARING

Using patented fluid dynamic bearings(FDB) made of copper, the life span of the Aer P is made to last over six years. FDB are designed to maintain consistent lubrication reducing bearing noise.

EVERY DETAIL COUNTS

The Aer P comes with sleeved cables for ease of cable management and vibration dampeners on each mounting point to keep fan noise to a minimum.

COLOR YOUR WAY

Three color choices are available and sold separately to color coordinate your build. Choose from blue, red or white.

NZXT RF-AP140-FP
NZXT Aer P Computer case Fan 14 cm Black, Grey
Performance
Mean time between failures (MTBF) 60000 h
Bearing type Fluid bearing
Pulse-width modulation (PWM) support Yes
Maximum air pressure 2.71 mmH2O
Minimum air pressure 0.21 mmH2O
Maximum airflow 98.17 cfm
Minimum airflow (imperial) 27.27 cfm
Noise level (high speed) 38 dB
Noise level (low speed) 21 dB
Rotational speed (max) 1800 RPM
Rotational speed (min) 500 RPM
Fan diameter 14 cm
Type Fan
Suitable location Computer case
>
Design
Fan connector 4-pin
Material Plastic, Rubber
Product colour Black, Grey
>
Power
Rated current 0.35 A
Voltage 12 V
Power consumption (typical) 4.2 W
>
Weight & dimensions
Fan dimensions (W x D x H) 140 x 140 x 26 mm
>
Other features
Country of origin China
Harmonized System (HS) code 84733080
>
Your item has been added to your basket
Limited Time Deals 
iiyama G2745HSU-B1 G-Master 27" Black Hawk Gaming Monitor - Full HD - IPS - 100Hz- 1ms - FreeSync - Speakers £79.99 £99.99 Save £20.00
Acer KA240YHbi 24" Monitor - 100Hz - 1ms - HDMI- AMD FreeSync- Full HD £69.99 £79.99 Save £10.00
Acer Aspire 3 A314-36P 14" Laptop - Intel Core i3 - 8 GB RAM- 512 GB SSD - Windows 11 Home - Silver £348.99 £499.99 Save £151.00
Swan Nordic Manual Espresso machine 1.2 L £99.99
free delivery
Anda Seat Phantom 3 PC gaming chair Upholstered padded seat Black
Anda Seat Phantom 3 PC gaming chair Upholstered padded seat Black £279.99
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £27.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £27.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock