Neomounts desk monitor arm Neomounts
Neomounts desk monitor arm
In Stock
£81.99

Neomounts desk monitor arm

Part number: FPMA-D550D3BLACK
Neomounts Tilt/Turn/Rotate Triple desk monitor arm (clamp) for three 10-27" Monitor Screens, Height Adjustable - Black

The Neomounts desk mount, model FPMA-D550D3BLACK is a tilt-, swivel and rotatable desk mount for 3 flat screens up to 27". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount.

Neomounts versatile tilt (+45°/-45°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 44 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy.

Neomounts FPMA-D550D3BLACK has four pivot points and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 6 kg per screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts VESA adapter plates.

By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.

All installation material is included with the product.

Neomounts FPMA-D550D3BLACK
Neomounts desk monitor arm
Mounting
Number of displays supported 3
Panel mounting interface 75 x 75,100 x 100 mm
Maximum VESA mount 100 x 100 mm
Minimum VESA mount 75 x 75 mm
Mounting Clamp/Bolt-through
Mounting type Desk
Maximum screen size 68.6 cm (27")
Minimum screen size 25.4 cm (10")
Maximum weight capacity 6 kg
Ergonomics
Angle of rotation 360°
Swivel angle 180°
Tilt angle range 0 - 90°
Depth adjustment range 40 - 460 mm
Height adjustment range 0 - 440 mm
Height adjustment type Manual
Height adjustment Yes
Design
Product colour Black
Weight & dimensions
Package height 465 mm
Package depth 102 mm
Package width 310 mm
Height 440 mm
Logistics data
Harmonized System (HS) code 7326909890
Products per pallet (EU) 70 pc(s)
Quantity per master (outer) case 3 pc(s)
Master (outer) case height 105 mm
Master (outer) case length 319 mm
Master (outer) case width 449 mm
Other features
Country of origin China
Your item has been added to your bag
Customers also bought
Russell Hobbs RHRETHFH1001B electric space heater Indoor Black 1800 W Fan electric space heater £24.99
Russell Hobbs RHOFR3001W 5 Fin Oil Filled Radiator in White £29.99
FR-TEC Inari Gaming Headset-Playstation/XBOX/PC/MAC/SWITCH- Black & Red £6.49 £12.99 Save £6.50
Black & Decker BXEH60001GB 900ml Portable Mini Dehumidifier White £37.99
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £24.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £24.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock