Screen size (inch) 34, Panel resolution 3440x1440, Refresh rate 100 Hz, Panel type VA, HDMI HDMI 2.0 x 2, Display Port DisplayPort 1.2 x 1, D-SUB (VGA) 0x, DVI 0x, Sync technology (VRR) Adaptive Sync
34” VA monitor with WQHD and slim 3 side frameless design for a comfortable and neat look The AOC U34E2M is equipped with a 34” VA panel with Ultrawide QHD 21:9 resolution for an incredible viewing experience and more screen estate to boost your productivity and multitasking. Multiple inputs supported thanks to HDMI and DP ports.
AOC
U34E2M
AOC U34E2M computer monitor 86.4 cm (34") 3440 x 1440 pixels Wide Quad HD Black
Display
Adobe RGB coverage
98%
NTSC coverage (typical)
100%
sRGB coverage (typical)
115%
Colour gamut
91%
Colour depth
8 bit
Colour gamut standard
DCI-P3
Display diagonal (metric)
86.4 cm
Pixel pitch
0.23175 x 0.23175 mm
Pixel density
109.7 ppi
Display number of colours
16.7 million colours
Viewing angle, vertical
178°
Viewing angle, horizontal
178°
Maximum refresh rate
100 Hz
Contrast ratio (dynamic)
20000000:1
Contrast ratio (typical)
4000:1
Screen shape
Flat
Backlight type
W-LED
HD type
Wide Quad HD
Response time
4 ms
Panel type
VA
Native aspect ratio
21:9
Display resolution
3440 x 1440 pixels
Display diagonal
86.4 cm (34")
>
Performance
Low Blue Light technology
Yes
Flicker-free technology
Yes
VESA Adaptive Sync support
Yes
>
Multimedia
Built-in camera
No
Built-in speaker(s)
No
>
Design
Detachable stand
Yes
Front bezel colour
Black
Frameless design
Yes
Product colour
Black
Market positioning
Home
>
Ports & interfaces
Headphone out
Yes
DisplayPort version
1.2
DisplayPorts quantity
1
HDMI version
2.0
HDMI ports quantity
2
HDMI
Yes
>
Ergonomics
Tilt adjustment
Yes
Tilt angle range
3.5 - 21.5°
Cable lock slot type
Kensington
Cable lock slot
Yes
Panel mounting interface
100 x 100 mm
VESA mounting
Yes
>
Power
Energy efficiency scale
A to G
Power supply type
Internal
Power consumption (off)
0.3 W
Power consumption (standby)
0.5 W
Power consumption (typical)
35 W
Energy consumption (HDR) per 1000 hours
45 kWh
Energy efficiency class (HDR)
G
Energy consumption (SDR) per 1000 hours
32 kWh
Energy efficiency class (SDR)
F
>
Sustainability
European Product Registry for Energy Labelling (EPREL) code
Connection to existing cooker socket outlet within 2 metres of appliance.
Test electrical circuit.
Assess connection point to comply with standard building regulations.
Test the appliance.
We are unable to connect if :
The connection point is not a standard outlet.
The electrical outlet is damaged or not complete.
On/off control is above the cooker in the "hot zone".
The electric circuit fails our tests.
A General assessment by installer suggests it is unsafe to connect.
To help the connection go smoothly, please watch ourconnection video.
Old Appliance Removal - £27.00
Remove & Recycle:
Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.
Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK
Defrosting is required ahead of recycling refrigeration products.
Gas Cookers are required to be disconnected ahead of removal.
Wet Connection - Washers - £27.00
WATER CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to water plumbing supply within 1m of appliance.
Connect to water supply connector if a safe and standard connection is present.
Connect to waste pipe within 1m from appliance.
Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Extended waste piping is being used.
Poor unsuitable plumbing is identified by installer.
Taps are seized and pose risk of leakage.
General assessment by installer suggests unsafe.
To help the connection of your appliance go smoothly, please watch ourdishwasherorwashing machineconnection video.
Wet Connection - Washer Dryers - £27.00
WATER CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to water plumbing supply within 1m of appliance.
Connect to water supply connector if a safe and standard connection is present.
Connect to waste pipe within 1m from appliance.
Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Extended waste piping is being used.
Poor unsuitable plumbing is identified by installer.
Taps are seized and pose risk of leakage.
General assessment by installer suggests unsafe.
To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.
Dry Connection - £15.00
DRY CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to suitable existing Dryer outlet vents.
Test appliance to ensure connected and ready for use.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Fridge specific - Door hangings are required to be reversed.
Dryer specific - Extended vent piping is being used.
Dryer specific - No outlet connection for dryer vent pipe.
General assessment by installer suggests unsafe.
To help the connection go smoothly, please watch ourconnection video.
