27", Full HD, IPS, LED, 1920 x 1080p, 100 Hz, 16:9, sRGB 99%, 250 cd/m, 2 x 2W, Black, 3.5kg
Acer EK271 E. Display diagonal: 68.6 cm (27"), Display resolution: 1920 x 1080 pixels, HD type: Full HD, Display technology: LED, Response time: 1 ms, Native aspect ratio: 16:9, Viewing angle, horizontal: 178°, Viewing angle, vertical: 178°. Built-in speaker(s). VESA mounting. Product colour: Black
- 4K UHD Resolution1 – See Every Detail in Unbelievable Clarity
- IPS Display – Vivid Colors at a Viewing Angle of up to 178°
- 10 Bit Color Depth1 - Fantastically Smooth Images
- 4ms Response Time – React and Respond Quickly to What You See on Screen
- BlueLightShield™ – Reduces Exposure to Blue Light
- ZeroFrame Design – Improved Enjoyment and Maximum Visibility
Acer
UM.HE1EE.E06
Acer EK271 E computer monitor 68.6 cm (27") 1920 x 1080 pixels Full HD LED Black
Display
sRGB coverage (typical)
99%
Colour depth
6 bit
Display diagonal (metric)
68.6 cm
Viewable size, vertical
33.6 cm
Viewable size, horizontal
59.7 cm
Pixel pitch
0.31 x 0.31 mm
Display number of colours
16.7 million colours
Viewing angle, vertical
178°
Viewing angle, horizontal
178°
Maximum refresh rate
100 Hz
Contrast ratio (dynamic)
100000000:1
Contrast ratio (typical)
1000:1
Aspect ratio
16:9
Supported graphics resolutions
1920 x 1080 (HD 1080)
Screen shape
Flat
Anti-glare screen
Yes
Display technology
LED
Backlight type
LED
HD type
Full HD
Response time
1 ms
Display brightness (typical)
250 cd/m²
LED backlight
Yes
Panel type
IPS
Native aspect ratio
16:9
Display resolution
1920 x 1080 pixels
Display diagonal
68.6 cm (27")
Multimedia
RMS rated power
2 W
Number of speakers
2
Built-in speaker(s)
Yes
Design
Product colour
Black
Market positioning
Gaming
Ports & interfaces
Headphone out
Yes
HDMI version
1.4
HDMI ports quantity
1
HDMI
Yes
VGA (D-Sub) ports quantity
1
Ergonomics
Tilt adjustment
Yes
Tilt angle range
-5 - 20°
Wall mountable
Yes
Panel mounting interface
100 x 100 mm
VESA mounting
Yes
Power
Energy efficiency scale
A to G
Power consumption (off)
0.3 W
Power consumption (max)
48 W
Power consumption (standby)
0.5 W
Power consumption (typical)
21 W
Energy efficiency class (HDR)
Not available
Energy consumption (SDR) per 1000 hours
21 kWh
Energy efficiency class (SDR)
E
Sustainability
European Product Registry for Energy Labelling (EPREL) code
Connection to existing cooker socket outlet within 2 metres of appliance.
Test electrical circuit.
Assess connection point to comply with standard building regulations.
Test the appliance.
We are unable to connect if :
The connection point is not a standard outlet.
The electrical outlet is damaged or not complete.
On/off control is above the cooker in the "hot zone".
The electric circuit fails our tests.
A General assessment by installer suggests it is unsafe to connect.
To help the connection go smoothly, please watch ourconnection video.
Old Appliance Removal - £27.00
Remove & Recycle:
Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.
Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK
Defrosting is required ahead of recycling refrigeration products.
Gas Cookers are required to be disconnected ahead of removal.
Wet Connection - Washers - £27.00
WATER CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to water plumbing supply within 1m of appliance.
Connect to water supply connector if a safe and standard connection is present.
Connect to waste pipe within 1m from appliance.
Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Extended waste piping is being used.
Poor unsuitable plumbing is identified by installer.
Taps are seized and pose risk of leakage.
General assessment by installer suggests unsafe.
To help the connection of your appliance go smoothly, please watch ourdishwasherorwashing machineconnection video.
Wet Connection - Washer Dryers - £27.00
WATER CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to water plumbing supply within 1m of appliance.
Connect to water supply connector if a safe and standard connection is present.
Connect to waste pipe within 1m from appliance.
Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Extended waste piping is being used.
Poor unsuitable plumbing is identified by installer.
Taps are seized and pose risk of leakage.
General assessment by installer suggests unsafe.
To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.
Dry Connection - £15.00
DRY CONNECTION SERVICE
We Offer :
Connect to an existing 13amp power socket within cable length.
Connect to suitable existing Dryer outlet vents.
Test appliance to ensure connected and ready for use.
We are unable to connect if :
Kitchen carpentry needs adjustment.
Electrical extension leads are in use.
Plug required to be cut off to feed through small gaps.
The appliance is hard wired into a connection box.
Fridge specific - Door hangings are required to be reversed.
Dryer specific - Extended vent piping is being used.
Dryer specific - No outlet connection for dryer vent pipe.
General assessment by installer suggests unsafe.
To help the connection go smoothly, please watch ourconnection video.
