EnerGenie MIHO026 light switch Stainless steel, White Energenie
EnerGenie MIHO026 light switch Stainless steel, White
In Stock
£25.99

EnerGenie MIHO026 light switch Stainless steel, White

Part number: MIHO026
220-240V, 50Hz, 1A, 250W, 85x28x85mm, 95g, Steel/White

EnerGenie MIHO026. Control type: Buttons, Wireless, Product colour: Stainless steel, White, International Protection (IP) code: IP20. Width: 85 mm, Depth: 28 mm, Height: 85 mm. Rated voltage: 240 V, Rated current: 1 A

Mi|Home Smart Single Light Switch (Steel)

This is a radio controlled switch for the switching of mainspower to lighting and appliances up to 250W. Only the Line is switched to the load. Switching is initiated either by radio control or manually by pressing the button on the housing. It is compatible with Mi |Home Remote Control (MIHO003) and the Mi |Home network. It is a receive-only device operating in the 433MHz ISM short-range band using OOK modulation.
- Suitable for Dimmable LED, Halogen and Incandescent Bulbs, up to 5 bulbs per circuit (not exceeding 250W total)
- NOT suitable for Flourescent, CFL or Non- Dimmable LED bulbs

Energenie MIHO026
EnerGenie MIHO026 light switch Stainless steel, White
Features
LED colour Red
International Protection (IP) code IP20
Product colour Stainless steel, White
Control type Buttons, Wireless
Buttons quantity 1
Weight & dimensions
Weight 95 g
Height 85 mm
Depth 28 mm
Width 85 mm
Power
Rated current 1 A
Rated voltage 240 V
Your item has been added to your bag
Customers also bought
Russell Hobbs RHRETHFH1001B electric space heater Indoor Black 1800 W Fan electric space heater £24.99
Russell Hobbs RHOFR3001W 5 Fin Oil Filled Radiator in White £29.99
FR-TEC Inari Gaming Headset-Playstation/XBOX/PC/MAC/SWITCH- Black & Red £6.49 £12.99 Save £6.50
Please enter your postcode below.
Add Services
Electric cooker installation
Electric cooker installation - £110.00

ELECTRIC COOK CONNECT

We Offer :

  • Connection to existing cooker socket outlet within 2 metres of appliance.

  • Test electrical circuit.

  • Assess connection point to comply with standard building regulations.

  • Test the appliance.

We are unable to connect if :

  • The connection point is not a standard outlet.

  • The electrical outlet is damaged or not complete.

  • On/off control is above the cooker in the "hot zone".

  • The electric circuit fails our tests.

  • A General assessment by installer suggests it is unsafe to connect.

To help the connection go smoothly, please watch our connection video.


Old Appliance Removal
Old Appliance Removal - £24.00

Remove & Recycle:

Unpacking the product at the consumer's home and ensuring that all of the packaging is recycled. We have specifically designed all of our packaging to be 100% recyclable. We separate the 4 constituent parts (polystyrene, plastic, wood and cardboard) at the depots then bale and compact the materials at our hub. These clean high quality materials are then sent directly to our recycling partner so they can be put back into the raw material streams.

Collecting the old product which is officially counted as WEEE (Waste Electrical and Electronic Equipment). These products are separated into the correct waste flow at our local depots and send directly to government approved WEEE recycling plants. As a White Goods manufacturer, we take our WEEE obligations very seriously and actively encourage our customers to use the most environmentally friendly recycling scheme available in the UK 

Defrosting is required ahead of recycling refrigeration products.

Gas Cookers are required to be disconnected ahead of removal. 

Wet Connection - Washers
Wet Connection - Washers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

 

Wet Connection - Washer Dryers
Wet Connection - Washer Dryers - £27.00

WATER CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to water plumbing supply within 1m of appliance.

  • Connect to water supply connector if a safe and standard connection is present.

  • Connect to waste pipe within 1m from appliance.

  • Test appliance to ensure connected and ready for use. Consisting of checking water in and pumps out.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Extended waste piping is being used.

  • Poor unsuitable plumbing is identified by installer.

  • Taps are seized and pose risk of leakage.

  • General assessment by installer suggests unsafe.

To help the connection of your appliance go smoothly, please watch our dishwasher or washing machine connection video.

Dry Connection
Dry Connection - £15.00

DRY CONNECTION SERVICE

We Offer :

  • Connect to an existing 13amp power socket within cable length.

  • Connect to suitable existing Dryer outlet vents.

  • Test appliance to ensure connected and ready for use.

We are unable to connect if :

  • Kitchen carpentry needs adjustment.

  • Electrical extension leads are in use.

  • Plug required to be cut off to feed through small gaps.

  • The appliance is hard wired into a connection box.

  • Fridge specific - Door hangings are required to be reversed.

  • Dryer specific - Extended vent piping is being used.

  • Dryer specific - No outlet connection for dryer vent pipe.

  • General assessment by installer suggests unsafe.

To help the connection go smoothly, please watch our connection video.


connection service
connection service - £110.00
Please choose a delivery date below.
You've selected
for your item to be delivered
Add additional warranty
Electric cooker installation - £110.00
Old Appliance Removal - £24.00
Wet Connection - Washers - £27.00
Wet Connection - Washer Dryers - £27.00
Dry Connection - £15.00
connection service - £110.00
Sorry, this item is now out of stock